Repairs to uPVC Windows
uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they don't get rusty or decay.
It is crucial to wash and oil UPVC windows and doors regularly. This will reduce repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a great amount of damage to your home, making it very dangerous and potentially fatal. It is important to take the time to make sure that you are doing everything you can to ensure that your windows are in good condition.
Single-pane windows are fairly simple to replace and will usually fit into the frames that were previously in use very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
If you plan to attempt to remove the window panes yourself it is important to wear the appropriate safety equipment, including thick gloves and eye protection. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric and not onto the floor, where they could be trampled.
It's a great idea to tape the gap once the glass is removed. This will stop water and drafts from entering your home until a professional arrives to repair the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap between the door and the window is large, you might want to use an alarm system that includes a window. This will provide the best of both.
2. Sagging
uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems, including sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. It's important to take action when you notice your uPVC windows are sliding.
To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows to access the frame. With a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have relocated your hinges. If you're satisfied with the size of the window, you can tighten screws to keep them in place.
If you aren't able to move the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to loosen. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and draught-proof.
UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it could also be due to the handle mechanism wearing out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. First, you'll need to close the window and perform an initial test to ensure that it fits. The joint at the corner website of the sash should be aligned with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.
3. Water Leaks
It is important to website take action if awake each day to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.
This is a relatively easy fix that can be done by any DIY expert. Depending on the severity of the issue is, old caulking may need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.
Verify that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.
Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and is able to quickly spread throughout the home.
It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it is more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or slack and blow open with a breeze it could be the hinges that are at the fault. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.
Almost every household in the UK will have window fitter near me top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It is very easy to replace a hinge on a window, but it's simpler if you have someone to help you to hold the frame.
It is also important to verify that the uPVC hinges are being opened and closed in the right direction. You can do this by looking for the arrow on each hinge. This shows which way the window should be opened.
The problem with the hinges on windows could be caused by improperly opening the window a certain way or due to improper installation in the factory. This can often be resolved by sending us a picture through our website and we will be pleased to offer you advice.
It is also glass window replacement near me important to ensure that the hinges are lubricated regularly. Applying an engineering lubricant that is light to the hinges is a good way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should do this once a year. WD40 or other solvent-based oils are not recommended as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different things. The hinges can also be misaligned due to wear, causing a gap between the frame and sash. These can be easily fixed by giving them a thorough clean, however if they are beyond repair it might be necessary to get them re-aligned or replaced. The interlock may be disaligned. This is located on the hinge's side and might require to be cleaned. In some instances it might be necessary to replace them.
The next most common reason for draughts is window seals. They are susceptible to being worn out or damaged over time, and let air escape through the gaps. Replacement of these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the risk of draughts.
The final windows installed near me method to cut down on draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler, which can be put on top of your window sill. They can keep your home warm by blocking out cold air.
With a little maintenance and repairs, your upvc windows will provide excellent security and insulation for your home. It is crucial to recognise that all windows have a lifespan and there may come the point when it's more cost-effective to replace them rather than fix them. So, if you're experiencing issues with your Upvc windows, it is recommended to seek help from a professional as soon as possible.